MISHIMOTO BAFFLED OIL CATCH CAN - MMBCC-UNI 2011-2016 FORD 6.7L POWERSTROKE
40-micron bronze filter blocks oil from depositing in ventilation system
Special engineered inlet pattern "turbulates" air longer, allowing oil to condense
Internal baffle ensures no oil escapes during high-speed cornering
Replaceable single-unit filter is easy to maintain
Inlet and outlet accept -AN fittings for various configurations
100% billet anodized 6061 aluminum with laser etched finish
Safe to use in pressurized systems
Drain plug can be removed to allow for -AN return to oil pan
Unique upper mounting bracket cogs provide versatile mounting options
Includes push-on fittings for easy installation
Mishimoto is proud to announce the release of our Baffled Oil Catch Can. With over a year of research and development time, Mishimoto has created the most effective oil catch can on the market. The Mishimoto Baffled Oil Catch Can was designed to separate oil particles from the PCV air that would normally have just been routed back to your intake. Custom grooves in the catch can's inlet turbulates the air longer and ensures all the oil sinks to the bottom of the can, leaving nothing but clean air to pass through the 40 micron bronze filter to the intake. An internal baffle keeps the collected oil from splashing around under race conditions.
The 100% billet, 6061 aluminum can accepts -AN fittings at the intlet, outlet, and drain area allowing over 27 possible configurations. For maximum fitment options, the top cog mounting setup allows the can to be mounted from multiple angles. To make maintenance easy, the drain plug can be removed to allow for -AN return to the oil pan. The can is also 100% washable, unlike many other cans that require you to replace your filtration system.
The Mishimoto Baffled Oil Catch Can is available in a variety of colors and, as with all our catch cans, comes with the unparalleled Mishimoto Lifetime Warranty you know and trust.
Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.
Overall Height 6"
Overall Diameter 3.06"
Inlet M20 x 1.5 (for accepting -10AN)
Outlet M20 x 1.5 (for accepting -10AN)
Drain Plug Thread Size M20 x 1.5 *
Capacity 9 fl oz
Assembled Weight 1.6 lbs
(1) Black, Anodized 6061 Aluminum Catch Can (2) Aluminum Mounting Brackets (1) Bronze Filter (1) Internal Baffle (3) Dowty Oil Seals (2) Push-on Fittings (1) Drain Plug (6) Black Rubber Oil Line (4) Worm-gear Clamps (1) Black Rubber Band Mounting Hardware & Brackets Mishimoto Lifetime Warranty
Material 6061 Aluminum
Note Click here http://www.mishimoto.com/mishimoto-transmission-coolers-oil-coolers.html#5 to view optional fittings and lines.
*Drain plug is attached to the internal baffle and if it is replaced, the internal baffle may not be usable again.