Superlift 4 inch Lift Kit - 2000-2004 Ford F-250/350 Super Duty 4WD - Diesel
Front leaf springs, track bar bracket, sway bar correction, shocks, rear block and u-bolt kit, and all hardware required specific to the 2000-2004 4wd Ford F-250.
Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
The best customer service and technical help in the industry.
Superlift's complete front Superide leaf spring lift kit for the 2000-2004 Ford F-250/F-350 4wd V-10 and diesel engine; providing 4” lift height with an option of Superlifts Superride Shocks or Shocks By Blistein
Springs incorporate military-wrapped spring eyes and anti-friction pads between leafs
Track bar relocation bracket prevents steering wheel "kick"
New front anti-sway bar hardware maintain factory bar geometry
Functional front compression travel stops prevent over-compression and provide a more progressive spring rate; factory rear travel-stops are relocated
Rear lift via 3" blocks
Front and rear Superlifts Superride Shocks or Shocks By Blistein
Limited Lifetime Warranty
Note: This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us. Please refer to the option's list or call our technical support line at (800) 551-4955 for additional details.
Rear u-bolts fit vehicles with and without a top-mounted overload leaf. Those without overloads will have approx. 2" of excess U-bolt length (that can be trimmed). Or for shorter U-bolts, refer to block chart and replace listed block kit with the non-overload application.
Rear lift based on vehicles with 2.5" tall factory. If vehicle equipped with 3.5" tall factory block expect slight rear to front rake.
Installation time: 6 hours
Difficulty level: 3 of 5
TIRE WHEEL BACKSPACING OFFSET
35 x 12.5 17 x 9 4.5 -
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.